Coemar CF 1200 Hard Edge Instruction Manual page 26

channel function
gobo 2 selection
13
special (SPEc)
effects selection
14
(prism, lens)
15 effects rotation
color selection
16
standard (Strd)
NOTE: channel 16 function can be varied selecting color standard/special function on the back function display
color selection
16
special (SPEc)
17 cyan
18 magenta
19 Yellow
20 function
Back panel can modify function channel (inhibit lamp off)
20 function
note 1: 2 or 4 numbers close to the end limit levels cannot be used as unstable levels
note 2: function channel has a delay time of 6 second to prevent accidental activation.
note 3 :on/off lamp mode is not affected unless an opposite value is received
type of control
step no gobo (clear)
proportional gobo wheel rotation 360° from no gobo to the last
proportional
gobo
proportional gobo wheel rotate continously, speed from min to max
step no effects (clear)
effect 1
effect 2
effect 3
step no effect
continuos effect rotation clockwise with proportional speed from min.
proportional
to max.
step White
step color 1
step color 2
step color 3
step color 4
step color 5
proportional color wheel rotate continously, speed from min to max
step no effect
proportional proportional color wheel rotation 360° from white to the last color
proportional color wheel rotate continously, speed from min to max
proportional proportional cyan control from white to cyan
proportional proportional magenta control from white to magenta
proportional proportional yellow control from white to yellow
step lamp off
step pan/tilt go to sensor
step all motor reset
step soft focus
step lamp on
step lamp on
step pan/tilt go to sensor
step all motor reset
step soft focus
step lamp on
effect decimal
0-10
11-151
152-255
0-62
63-126
127-190
191-255
0-26
27-255
0-23
24-49
50-73
74-99
100-123
124-151
152-255
0-10
11-151
152-255
0-255
0-255
0-255
0-19
20-100
101-170
171-240
241-255
0-19
20-100
101-170
171-240
241-255