Coemar CF 1200 Hard Edge Instruction Manual page 17

resetting the lamp life counter
The lamp life counter needs to be reset to zero at every lamp change to provide
accurate information on lamp life
1) Turn off the projector
2) Power up the CF 1200 Hard Edge whilst simultaneously holding down the +
and - buttons.
3) Press the menu button.
4) Press the + or - button until the display shows LIFE (for lamp life).
function display
5) Press the enter button to confirm your selection; the display will show 0000 con-
firming that the counter has been reset.
dirp
This function inverts the movement for horizontal (pan) movements.
1) Press the menu button.
2) Press the + or - button until the display shows dirP (for pan direction).
function display
3) Press the enter button to confirm your selection; the display will show cW (for
clockwise).
function display
4) Press the + or - button; the display will show ccW (for counterclockwise).
function display
5) Press the enter button after either step 3 or 4 to confirm your choice of direction.
dirt
This function inverts the movement for vertical (tilt) movements.
1) Press the menu button.
2) Press the + or - button until the display shows dirt (for tilt direction).
function display
3) Press the enter button to confirm your selection; the display will show cW (for
clockwise).
function display