Coemar CF 1200 Hard Edge Instruction Manual page 22

channel function
color selection
16
standard (Strd)
NOTE: channel 16 function can be varied selecting color standard/special function on the back function display
color selection
16
special (SPEc)
5) Press the enter button after either step 3 or step 4 to confirm your choice of colour
selection.
type of control
step White
step color 1
step color 2
step color 3
step color 4
step color 5
proportional color wheel rotate continously, speed from min to max
step no effect
proportional proportional color wheel rotation 360° from white to the last color
proportional color wheel rotate continously, speed from min to max
disp
This function inverts the LED display in the display panel, thereby allowing it to be
read easily regardless of the position in which the projector is mounted (see section
6. Mounting the unit).
1) Press the menu button.
2) Press the + or - button until the display shows diSP (for display).
function display
3) Press the enter button to confirm your selection; the display shows AA (for han-
ging position).
function display
4) Press the + or - button; the display shows
function display
5) Press the enter button after either step 3 or step 4 to confirm your selection.
LEd
This function allows the display to be switched on or off.
1) Press the menu button.
2) Press the + or - button until the display shows Led.
function display
effect
A A
(for sitting position).
decimal
0-23
24-49
50-73
74-99
100-123
124-151
152-255
0-10
11-151
152-255