Coemar CF 1200 Hard Edge Instruction Manual page 4

Congratulations on having purchased a coemar product. You have assured yourself of a fixture of the highest quality, both in
componentry and in the technology used. We renew our invitation to you to complete the service information on the previous
page, to expedite any request for service information or spares (in case of problems encountered either during, or subsequent
to, installation). This information will assist in providing prompt and accurate advice from your coemar service centre.
1. Packaging
2. Transporting
Following the instructions and procedures outlined in this manual will ensure the
maximum efficiency of this product for years to come.
Open the packaging and ensure that no part of the equipment has suffered damage
in transit. In case of damage to the equipment, contact your carrier immediately by
telephone or fax, following this with formal notification in writing.
packing list
Ensure the packaging contains:
1 CF 1200 Hard Edge
1 instruction manual
The CF 1200 Hard Edge should be transported in its original packaging or ain a
coemar approved flight case.
In order to manufacture a suitable flight case, we recommend the follwing simple
procedure be followed, which will stop the articulated movement of the CF 1200
Hard Edge during transportation.
Below are illustrated the 2 diverse methods of padding which we recommend:
A) Padding around teh entire projector, including the base, with suitable padding
materials.
B) Fixing the base to a rigid support, with padding surrounding the articulated
head.
Pomoli di fissaggio/
Knobs
Polietilene
espanso/
Foam
Pomoli di fissaggio/
Polietilene
espanso/
Foam
Knobs