Coemar CF 1200 Hard Edge Instruction Manual page 31

replacing gobos on the fixed gobo wheel
You may replace the standard gobos with either dichroic glass or metal gobos by fol-
lowing these simple instructions:
A) replacing glass gobos
1) Slide the gobo gently towards the centre of the gobo wheel in order to release it
from the 2 upper retaining clips (A).
2) Slide the gobo away from the centre of the gobo wheel to release it from the cen-
tral retaining clip (B) and thus remove it from the unit.
3) To insert a new gobo repeat the procedure in reverse, first sliding the gobo under
the central retaining clip (B) then seat it under the two outer clips (A).
3) Ensure that the gobo is seated correctly in its guide under the springs.