Mains Connection - Coemar CF 1200 Hard Edge Instruction Manual

7. Mains connection

cabling
The mains cable provided is thermally resistant, complying to the most recent
international standards. It meets or exceeds the VDE and IEC norms, IEC 331,
IEC 332 3C,CEI 20 35.
NB: In case of cable replacement, similar cable with comparable thermal resistant quali-
ties must be used exclusivelly (cable 3x1.5 ø external 10 mm, rated 300/500V, tested
to 2KV, operating temperature -40° +180°, coemar cod. CV5309).
mains connection
The CF 1200 Hard Edge can operate at voltages from 208V-230V-240V at 50 or
60Hz (operating voltage and frequency can be selected as described in section 5 of
this manual).
Prior to connecting the unit to your mains supply, ensure that the model in your pos-
session correctly matches the mains supply available to you.
For connection purposes, ensure your plug is of a suitable rating: 9.5 amps.
Locate the mains cable which exits the base of the unit and connect as shown
below:
marrone - brown
blu - blue
giallo/verde - yellow/green
marrone - brown
blu - blue
giallo/verde - yellow/green
marrone - brown
blu - blue
giallo/verde - yellow/green
alimentazione
main