Interchanging Gobos - Coemar CF 1200 Hard Edge Instruction Manual

15. Interchanging gobos

The CF 1200 Hard Edge utilises a mechanical system which allows the fixtures
gobos to be removed without the need for specialised equipment.
Replacement gobos should be made of either heat resistant glass or metal.
An ever-increasing range of gobos is available from your coemar sales network.
replacing gobos on the rotating gobo wheel
Gobos may be replaced as required to produce special effects as required.
Gobo replacement should always be carried out with the power to the unit shut off,
and the inspection lid removed as described in section 14.
1) Release the gobo retaining spring (D) as shown in the following diagrams.