Mounting The Unit - Coemar CF 1200 Hard Edge Instruction Manual

6. Mounting the unit

mounting
The CF 1200 Hard Edge may be either floor or ceiling mounted.
The structure from which the unit is hung should be of sufficient rating to hold the
weight of the unit, as should any clamps used to hang the unit.
The structure should also be sufficiently rigid so as not to move or shake whilst the
CF 1200 Hard Edge moves during its operation.
The mounting holes in the base of the unit allow it to be mounted at various angles
to the mounting truss and to trusses of various dimensions.
Note that in order to take advantage of the full articulated movement of the projec-
tor, it should be installed with the label marked " Lato frontale/ Front" facing towards
the main item to be illuminated; in this manner the "0" or "home" position of the CF
1200 Hard Edge will be in the most efficient position.
protection against liquids
The projector contains electric and electronic components that must not come into
contact with water, oil, or any other liquid.
movement
The projector has a movement of 370° in the base and 270° in the yoke; DO NOT
place any obstructions in the path of the projector's movement.
safety chain
The use of a safety chain (cod. 069) - fixed to the CF 1200 Hard Edge and to the
primary suspension point, is highly recommended to protect against accidental failu-
re, however unlikely, of the primary suspension point.
If using an after-market safety chain not manufactured by coemar, ensure that it is
of sufficient rating to hold the weight of the fixture.
risk of fire
Each fixture produces heat and must be installed in a well-ventilated position. The
minimum recommended distance from flammable material is: 0.5m. Minimum
distance from the object being illuminated is: 2 m.