Coemar CF 1200 Hard Edge Instruction Manual page 21

lamp
This function allows for the on/off control of the lamp via DMX 512 signal, or for
the permanent on (disenabling DMX control of this function) of the lamp.
1) Press the menu button.
2) Press the + or - button until the display shows LAMP (for lamp).
function display
3) Press the enter button to confirm your selection; the display will show Strd (for
standard) which corresponds to the standard configuration whereby the lamp
can be turned on remotely by bringing channel 20 up to 100%, or off at 0%.
function display
4) Press the + or - button; the display will show on (for lamp on). At this setting,
the lamp will remain on regardless of the level set on channel 20.
function display
5) Press the enter button after step 3 or 4 to confirm your selection.
coLo
This function allows the colour wheel to be used in a proportional manner via DMX
512 signal.
1) Press the menu button.
2) Press the + or - button until the display shows coLo (for colour wheel).
function display
3) Press the enter button to confirm your selection; the display will show Strd (for stan-
dard) which corresponds to the automatic centring of the colours on the colour wheel
in the optical path of the unit. A change in the DMX 512 signal corresponds to a colour
change by the CF 1200 Hard Edge.
function display
4) Press the + or - button; the display shows SPEc (for special) which corresponds
to the proportional selection of the colour on the colour wheel (split colours are
thereby possible)
function display