Table of Contents
Advertisement
channel
function
gobo 2 selection
13
standard (Strd)
NOTE: channel 13 function can be varied selecting gobo standard/special function on the back function display
gobo 2 selection
13
special (SPEc)
Gob2
This function allows the gobos on gobo wheel 2 (static gobos) to be either centred
in the optical path of the projector or to be utilised in a proportional manner via
DMX 512 signal, thus allowing the creation of split gobos.
1) Press the menu button.
2) Press the + or - button until the display shows Gob 2 (for gobo).
function display
3) Press the enter button to confirm your selection; the display whill show Strd (for
standard) which corresponds to the automatic centring of gobos on gobo wheel
2 in the optical path of the projector
function display
4) Press the + or - buttons; the display will show SPEc (for special) which corre-
sponds to the proportional rotation of gobo wheel 2.
function display
(a variation in the DMX 512 signal corresponds to a proportional rotation of
gobo wheel 2, thus allowing gobos from this wheel to be positioned out of cen-
tre in the optical path of the projector)
type of control
step
no gobo (clear)
step
gobo 1
step
gobo 2
step
gobo 3
step
gobo 4
step
gobo 5
proportional
gobo wheel rotate continously, speed from min to max
step
no gobo (clear)
proportional gobo wheel rotation 360° from no gobo to the last
proportional
gobo
proportional
gobo wheel rotate continously, speed from min to max
5) Press the enter button after either step 3 or 4 to confirm your choice of the man-
ner in which gobo wheel 2 will respond to the DMX signal.
effect
decimal
0-23
24-49
50-73
74-99
100-123
124-151
152-255
0-10
11-151
152-255
Advertisement
Table of Contents
