Powering Up; Operating Voltage And Frequency; Connection To Mains Power - Coemar MiniLEDko Spot User Manual

5

. Powering up

5.1

Operating voltage and frequency

The unit may operates at voltages ranges from 80 to 264 Vac at a frequency of 50 or 60 Hz (on
request available other voltage range). It is not needed to effect any setup procedures: Mini-
LEDko Spot will automatically adjust its operation to suit any frequency or voltage within this
range.
5.2

Connection to mains power

Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International
standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant qualities
must be used exclusively (cable 3 X 1,5 ø external 10 mm, rated 300/500V, tested to 2 KV,
operating temperature -40°C + 180°C, Coemar cod. CV5311).
Connection to mains power
MiniLEDko Spot is equipped with one power connectors.
The max absorption of MiniLEDko Spot is reported in the following table:
- 0.07 A @ 230 VaC constant during normal exercise.
- 0.15 A @ 115 VaC constant during normal exercise.
brown
blue
yellow / green
User Manual 2023
fase
neutral
mass
16
coemar.com