11.1.Powering up the
CF 1200Hard Edge with its roadcase
movement disenabled
This function can be useful should you need to power up the CF 1200 Hard Edge in
or for any other reason where you may wish to power up the unit
without it moving.
1) Power up the projector whilst simultaneously pressing the enter and - buttons
The projector will perform the usual reset functions on every motor barring the pan
and tilt motor, which will remain static throughout the reset procedure.
2) You may at this point alter a DMX address, or any other menu-based parameter
without projector articulated movement.
3) Top resume normal CF 1200 Hard Edge functioning you must turn the projec-
tor off and then on again.