Copier Service Tables; Group 1000 - Ricoh B132 Service Manual

SERVICE PROGRAM TABLES

5.5.2 COPIER SERVICE TABLES

Group 1000

1001 Lead Edge Reg
001 Adjusts the printing leading edge registration using the trimming area pattern
(SP2109, Pattern No. 10).
[–9~+9/0.1mm]
Specification: 3±2mm
1002 Side-to-Side Reg
Adjusts printing side-to-side registration for each feed station, using the test
pattern (SP2109, Pattern No. 10).
These SP's should be adjusted after replacing the laser synchronization detector or
the laser optical unit.
001 Tray 1
002 Tray 2
003 Tray 3
004 Tray 4
005 Bypass Tray
006 LCT
007 Dupx Tray
1003 Reg Buckle Adj
Adjusts the registration motor timing. This timing determines the amount of paper
buckle at registration. (A higher setting causes more buckling.)
001 Trays & LCT
002 Dupx Tray
003 Bypass Tray
1007 Bypass Size Disp
Use this SP to display and confirm the size of the paper detected in the by-pass tray
if paper is skewing during feeding.
[0~255/1 mm]
1008 Duplex Fence Adj
Allows fine adjustment of the distance between the edges of the sheet and the
jogger fences when the fences come together to position the sheet in the duplex
unit.
[-3~+3/0.1 mm]
B132/B200
Leading Edge Regisration Adjustment
Side-to-Side Registration Adjustment
[–9~+9/0.1 mm]
Japan Only
Registration Buckle Adjustment
[–9~+9/1 mm]
[–9~+9/1 mm]
[–9~+9/1 mm]
Bypass Paper Size Detection Display
Duplex Side Fence Position Adjustment
5-22 SM