Copier Service Program Mode Tables; Sp1-Nnn Feed - Ricoh B234 Service Manual

MAIN SERVICE PROGRAM MODE TABLES
5.2.1

COPIER SERVICE PROGRAM MODE TABLES

SP1-nnn Feed

1001 Leading Edge Registration
Adjusts the printing leading edge registration for feeding from the trays and duplex tray
using the trimming area pattern (SP2-902-3, No.15).]
Use the "• / *key to enter the minus ( –) before entering the value.
The specification is 4± 2 mm
001 Copier/LCT Paper Tray
[-9.0~+9.0 /0 / 0.5 mm]
002 Duplex Tray
[-9.0~+9.0 /0 / 0.5 mm]
003 Copier//LCT Paper Tray (Low Speed)
[-9.0~+9.0 /0 / 0.5 mm]
004 Duplex Tray (Low Speed)
[-9.0~+9.0 / 0 / 0.5 mm]
1002 Side-to-side Registration
Adjusts the printing side-to-side registration from the 1st paper feed station using the
trimming area pattern (SP2-902-3, No.15).
Use the "• / *key to enter the minus ( –) before entering the value.
Specification: 0 ± 2.0 mm.
001 1st Tray (Copier Tandem Tray)
002 2nd Tray (Copier)
003 3rd Tray (Copier)
004 4th Tray (LCT Tray 1)
005 5th Tray (LCT Tray 2)
006 6th Tray (LCT Tray 3)
007 7th Tray (Bypass Tray)
008 Duplex Tray (Copier)
1003 Paper Buckle Adjustment (Registration)
Adjusts the relay clutch timing at registration. The relay clutch timing determines the
amount of paper buckle at registration. (A plus or minus setting increases or decreases
the amount of buckle.)
001 Copier Paper Tray
002 LCT
003 Duplex Tray
004 Adjust Buckle Amount
B234/B235/B236/D101/D102/D103
[-9.0~+9.0 / -0.1 / 0.5 mm]
[-9.0~+9.0 / -0.6/ 0.5 mm]
[-9.0~+9.0 / -0.3 / 0.5 mm]
[-9.0~+9.0 / -0.8 / 0.5 mm]
[-9.0~+9.0 / -0.8/ 0.5 mm]
[-9.0~+9.0 / +0.3 / 0.5 mm]
[-9.0~+9.0 / -0.3 / 0.5 mm]
[-9.0~+9.0 / 0 / 0.5 mm]
[-9~+9 / +4 / 1 mm]
[-9~+9 / +4 / 1 mm]
[-9~+9 / +4 / 1 mm]
Manual adjustment
5-8 SM