Ricoh B132 Service Manual page 612

SERVICE PROGRAM TABLES
6102 Adj Punch Pos 2
Adjusts the punch position perpendicular to the direction of feed.
[-20~+20/0.4 mm]
+ Value: Shifts punch unit toward back of the finisher.
- Value:
001 2-Hole:DOM
002 3-Hole:NA
003 4-Hole:EU
004 4-Hole:SCAN
005 2-Hole:NA
6103 Punch Hole Reg 1
This SP corrects punch hole alignment by correcting the skew of each by adjusting
the amount of time the finisher entrance roller remains off while the exit roller of the
machine remains on. This buckles the leading edge of the sheet slightly against the
finisher entrance roller while it remains off.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 12" x 18"
012 Custom Size
B132/B200
Punch Position Adjustment
Shift punch unit toward front of the finisher.
Punch Hole Registration Adjustment
[-500~+500/0.3 mm]
+ Value:Increases time finisher entrance roller remains off.
- Value: Descreases time finisher entrance roller remains off.
Paper Feed
B132S922.WMF
5-134 SM