Ricoh B132 Service Manual page 509

1202 Set Fusing Temp
This SP sets the time interval for the machine to remain idle to trigger lower power
mode 1.
Set Fusing Temp
001 EngSave Time 1
002 EngSave Time 2
003 EngSave Time 3
Heating Roller
004 Energy Save 1
005 Energy Save 2
006 Energy Save 3
Pressure Roller
007 Energy Save 1
008 Energy Save 2
009 Energy Save 3
Hot Roller
010 Energy Save 1
011 Energy Save 2
012 Energy Save 3
1203 Fusing:I/O
This SP adjusts the operation of the fusing exit sensor.
001 FuseExitSn:On/Off
002 FuseExitSn Timing
003 FuseExitSn ON
004 FuseExitSn Disp
005 FuseExit M ON
1901 CPM Down:Thk
This SP adjusts the CPM down time for thick paper and tab sheets.
001 CPM Down:Thk
002 CPM Down:Tab
SM
Set Fusing Temperature (for shift to low power mode)
[0~60/1 deg.]
Fusing Input/Output
Display indicates whether the fusing exit sensor is on or off.
0: OFF 1:ON
Displays the time interval from when the registration motor
goes off to when it restarts.
[0~5000/1 msec.]
Display indicates whether the fusing paper remains sensor is
on or off.
[0~5000/1 msec.]
Dsiplays whether the paper remains sensor is on or off from
when the registration motor goes off until it restarts.
0: OFF 1:ON
Switches forced rotation of the fusing/exit motor on/off.
[0~1/1]
CPM Down Mode: Thick Paper
Special CPM Down Setting: Thick Paper
[0~4/1]
Special CPM Down Setting: Index Tabs
[0~4/1]
5-31
SERVICE PROGRAM TABLES
B132/B200