Sc900: Miscellaneous - Ricoh B132 Service Manual

SERVICE CALL CONDITIONS

SC900: Miscellaneous

SC900 D Electrical total counter error
The total counter contains
something that is not a number.
SC910 B
SC911
SC912
SC913
SC914 B
SC919 D External controller down
The EAC received an interrupt signal
from the FLUTE serial driver during
print jobs in progress and the
connection between the copier and
external controller was broken.
Note: The EAC is the External Api
Converter.
SC920 B Printer error 1
An internal application error was
detected and operation cannot
continue.
SC921 B Printer error 2
When the application started, the
necessary font was not on the SD
card.
B132/B200
External controller error 1
External controller error 2
External controller error 3
External controller error 4
The external controller (Fiery) sends
an error message.
External controller error 5
The external controller (Fiery) sends
an error message.
• NVRAM incorrect type
• NVRAM defective
• NVRAM data scrambled
• Unexpected error from external source
• Turn the machine power
off/on
Turn the machine power off/on
• Switch the machine off and on.
• Software defective; turn the machine
off/on, or change the controller firmware
• Insufficient memory
• Font not on the SC card
4-70 SM