Ricoh B132 Service Manual page 646

SERVICE PROGRAM TABLES
8 311 T:Scan PGS/Rez
These SPs count by resolution setting the total number of pages
scanned by applications that can specify resolution settings.
8 315 S:Scan PGS/Rez
These SPs count by resolution setting the total number of pages
scanned by applications that can specify resolution settings.
Note: At the present time, 8 311 and 8 315 perform identical counts.
8 31x 1 1200dpi ~
8 31x 2 600dpi~1199dpi
8 31x 3 400dpi~599dpi
8 31x 4 200dpi~399dpi
8 31x 5 ~199dpi
• Copy resolution settings are fixed so they are not counted.
• The Fax application does not allow finely-adjusted resolution settings so no count
is done for the Fax application.
8 381 T:Total PrtPGS
8 382 C:Total PrtPGS
8 384 P:Total PrtPGS
8 385 S:Total PrtPGS
8 386 L:Total PrtPGS
8 387 O:Total PrtPGS
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT
page is counted as 2.
• When several documents are merged for a print job, the number of pages stored
are counted for the application that stored them.
• These counters are used primarily to calculate charges on use of the machine,
so the following pages are not counted as printed pages:
• Blank pages in a duplex printing job.
• Blank pages inserted as document covers, chapter title sheets, and slip
sheets.
• Reports printed to confirm counts.
• All reports done in the service mode (service summaries, engine
maintenance reports, etc.)
• Test prints for machine image adjustment.
• Error notification reports.
• Partially printed pages as the result of a copier jam.
B132/B200
[0~9999999/ 1]
[0~9999999/ 1]
These SPs count the number of pages
printed by the customer. The counter for
the application used for storing the pages
increments.
[0~9999999/ 1]
The L: counter counts the number of pages
stored from within the document server
mode screen at the operation panel. Pages
stored with the Store File button from
within the Copy mode screen go to the C:
counter.
5-168 SM