[A]
[B]
28. Check the following to points to be sure that the developer cartridge is set
properly.
•
Tabs [A] and [B] should be locked.
•
The developer cartridge edge [C] should be flat and not bulging or floating
away from the side of the development unit
•
Pull gently on the developer cartridge at [D] to make sure that it does not
part from the development unit.
29. Attach the cartridge [E] ( x2).
I
: D
MPORTANT
O NOT REMOVE THE FILM SEAL
.
TIME
SM
[D]
[C]
B132I106B.WMF
[E]
[F]
ON THE DEVELOPER CARTRIDGE AT THIS
3-47
PCU
[F]
B132I106C.WMF
B132/B200