Ricoh B132 Service Manual page 491

PCcard -> ROM Page01
Using the Screen:
• To select the item for upgrade, touch the selection on the touch panel, or
push the corresponding key on the 10-key pad (1 to 5) of the operation
panel. The number in parentheses tells you which key to push. When you
make a selection, the [Verify(./)] and [Update(#)] buttons appear on the
screen.
• If you push [Exit] (or the [0] key), you go back to the usual operation screen.
• Push the [Start] key on the operation panel to select and download all the
options shown on the screen.
• Push the [Clear] key on the operation panel if you want to cancel your
selections and make new ones.
While the Update Is in Progress...
• Remain with the machine. Do not leave it unattended.
• The [Start] key flashes RED during firmware update, and then lights GREEN
when the update is finished.
• Never switch the machine off while the [Start] key is flashing RED. If the
machine is switched off or accidentally unplugged before the update is
finished, do not remove the SD card. Just switch the machine on again. The
firmware update should restart automatically. If the firmware update does
not recover, order another SD card (P/N B1325730).
• Never close the front door during firmware update.
SM
R O M : 00000000
Engine (1)
R O M : 0. 01
R O M : 60705254
System (2)
R O M : 12. 16: 16
R O M : B 0705370
NA
R O M : 11. 22
EU
5-13
FIRMWARE UPDATE
N EW : G 0000000
N EW : 0. 08
N EW : 60705254
N EW : 12. 16: 16
N EW : B 0705370
N EW : 12. 31
Exit (0)
B132S901.WMF
B132/B200