Lct Installation - Ricoh B132 Service Manual

LCT (B473), LCT ADAPTER (B699)

LCT Installation

1. Remove the LCT installation cover [A] from the right side of the machine.
( x 2).
2. Remove the upper covers [B].
3. Remove the lower covers [C].
4. Attach the brackets [D] that are supplied with the LCT Adapter (B699) ( x 2
each – M4 x 8).
5. Attach the two grooved docking pins [E].
NOTE: The docking pin without a groove is not necessary for this installation.
B132/B200
[D]
[D]
1-56
[A]
[E
[B]
[C]
B699I104.WMF
SM