Ricoh B132 Service Manual page 576

SERVICE PROGRAM TABLES
4400 Org Edge Mask
This SP sets the area to be masked during platen (book) mode scanning.
001 Book:Sub:LEdge
002 Book:Sub:TEdge
003 Book:Main:LEdge
004 Book:Main:Tedge
005 ADF:Sub:LEdge
007 ADF:Main:TEdge
008 ADF:Main:TEdge
4417 IPU Test Pattern
Use this SP to select the IPU test pattern to print.
Test Pattern
0 Scanned Image
1 Gradation Main Scan A
2 Gradation Main Scan B
3 Gradation Main Scan C
4 Gradation Main Scan D
5 Gradation Sub Scan 1
6 Grid Pattern
7 Slant Grid Pattern
8 Gradation RGBCMYK
9 UCR Pattern
10 Color Patch 16 (1)
11 Color Patch 16 (2)
12 Color Patch 16 64
4440 Saturation Adj
This SP adjusts the saturation level for copying.
[0~5/1]
0: High
1: Lowest
2: Lower
3: Default
4: Higher
5: Highest
B132/B200
Set the Mask for Original
[0~30/0.1 mm]
Set IPU Test Pattern
[0~24/1]
13
14
15
16
17
18
19
20
21
22
23
24
Adjust Color Saturation
5-98
Grid Pattern CMYK
Color Patch CMYK
Gray Pattern (1)
Gray Pattern (2)
Gray Pattern (3)
Shading Pattern
Thin Line Pattern
Scanned + Grid Pattern
Scanned + Grayscale
Scanned + Color Patch
Scanned + Slant Grid C
Scanned + Slant Grid D
SM