Ricoh B132 Service Manual page 600

SERVICE PROGRAM TABLES
5844 USB
001 Transfer Rate
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
002 Vendor ID
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000~0xFFFF/1] DFU
003 Product ID
Sets the product ID.
[0x0000~0xFFFF/1] DFU
004 Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
[0000~9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
5845 Delivery Server
These are delivery server settings.
001 FTP Port No.
[0~65535/1]
002 IP Address
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be used with the initial system setting.
[0~FFFFFFFF/1]
006 Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a test
error occurs during document transfer with the NetFile application and an external
device.
[0~999/1]
008 IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary delivery
server for Scan Router. This SP lets you set only the IP address, and does not
refer to the DNS setting.
009 Delivery Server Model
Lets you change the model of the delivery server that is registered by the I/O
device.
[0~4/1]
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
B132/B200 5-122 SM