Bottom Plate Lift - Ricoh B132 Service Manual

6.4.5 BOTTOM PLATE LIFT

[B]
[C]
[A]: Bottom plate lift motor
[B]: Lift lever
[C]: Bottom plate HP sensor
When an original is placed on the original tray:
• Original set sensor ! On ! pick-up roller drops
• Bottom plate position sensor ([E] on the previous page) ! Off.
• Motor [A] lifts lever [B] and raises the bottom plate.
When the bottom plate reaches the correct feed height for feeding:
• Bottom plate position sensor ([E] on the previous page) ! On ! Stops bottom
plate lift.
• Motor [A] stops
During original feeding:
• Pick-up roller descends as the top of the stack lowers
• The descended pick-up roller ! bottom plate position sensor ([E] on the previous
page) ! Off
• Bottom plate lift motor [A] ! On ! motor [A] raises the stack to the correct
height for feeding
• Bottom plate position sensor ([E] on the previous page) ! On
• Bottom plate lift motor [A] stops
SM
B132D111.WMF
6-21
ARDF
[A]
B132/B200