Rev. 07/2005
⇒
4.4 ELECTRICAL BREAKER SWITCH TEST
4.4.1 HOW TO TEST THE ELECTRICAL BREAKER SWITCH
NOTE:
! The breaker switch is located at the left rear corner of the machine.
! When the switch is in the ON position, you can see the "|" mark on the lower
part of the switch.
1. Connect the power plug. Then, push the test button [A] with the tip of a pen.
# If the switch [B] is functioning normally, it will automatically move to the
middle position. You will see the "|" mark and the "o" mark.
SM
ELECTRICAL BREAKER SWITCH TEST
[A]
4-75
[B]
B132/B200