Ricoh B132 Service Manual page 247

[C]
[D]
[E]
Remove:
[A]: Left plate ( x4)
[B]: Right plate ( x4)
[C]: Ground wire ( x1)
[D]: Cross piece ( x4)
Before going to the next step,
disconnect the connector [*].
[E]: Detach the support rod from the
rubber clamps.
[F]: Raise the scanner unit. ( x 2)
[G]: Set the support rod at the base
% then under the front, right
corner & of the scanner unit.

CAUTION
The scanner unit is very heavy. Never remove the support rod during
servicing.
Reinstallation
• Be sure to reconnect ground wire [C].
SM
[A]
[B]
3-37
B132R001.WMF
[F]
LASER UNIT
2 [*]
[G]
1
B132R002.WMF
B132/B200