Installation - Ricoh B132 Service Manual

Installation

B737I105.WMF
1. Remove the I/F cover slot [A] of Slot D ( x2).
2. Touch a metal surface to remove static charge from your hands before you
touch the interface card.
3. Put the interface board [B] in Slot D.
4. Check that the board is fully in the slot, then attach it ( x2).
5. Remove the cap [C] and discard it.
6. Put the card [D] in the slot of the interface card.
7. Turn the machine off and on. Then do SP5990 to print an SMC Report to check
that the interface board is installed correctly.
SM
[B]
[D]
[C]
1-133
MFP CONTROLLER OPTIONS
[A]
B132/B200