Schedule Recording; Schedule Backup To Local Hard Drive - Digimerge DH200+R Series Instruction Manual

Schedule Recording

To enable/disable schedule recording:
1. Right-click on the DVR you wish to configure and then click Control>Schedule>Start /
Stop.
• Click Start to enable schedule recording. Click Stop to stop schedule recording.

Schedule Backup to Local Hard Drive

You can schedule regular backup of video to your local hard drive. The schedule can be configured
to back up 24 hours of video, or during a specified time only.
Prerequisite
• 3GB of hard drive space (backup will not function if there is less than 3GB).
• DVRs must be in offline mode.
To configure Schedule Backup settings:
1. Click the DVR that you wish to configure.
2. Click the Device button ( ).
Device button
CMS-DH Central Management Software
75