Digimerge DHU500R Series Quick Start Manual

Set up Your DIGItAL VIDeo reCorDer FIrSt
1
2
3
4
Congratulations! You have completed Step 1 successfully. Your DVr is now
ready to use. refer to the owner's manual to learn how to record, playback,
use the search features and all other features available with this system.
refer to Step 3 for Setting up remote Security Monitoring.
Information in this document is subject to change witho ut notice. As our products are subject to continuous improvement,Digimerge Technologies Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2007 . Digimerge - All rights reserved.
DHU500R Series Quick Start Guide_R1
Page 1
Connect Cameras & Monitor to the DVr:
(not included)
Connect the first camera to the CH1 input. Follow the same steps
to connect the additional cameras*.
* NOTE: Test the cameras prior to selecting a permanent mounting
location by temporarily connecting the Cameras and Cables to
your DVR.
Connect a CCTV monitor to the Monitor OUT (Composite
OUT) port to view camera images.
Connect ethernet Cable:
Connect one end of the ethernet cable to one of the router's (not
included) LAN PORTS and the other end to DVR's Network Port
located at the back of the DVR. See picture below showing a
generic LAN/WAN connection.
LAN (LOCAL AREA NETWORK)
WAN (WIDE
AREA NETWORK)
BACK OF THE ROUTER
TO YOUR MONITOR
TO YOUR COMPUTER
Connect power Cable:
Connect one end of the Power cable to the DVR, the other end to
an electrical outlet. This unit powers ON once it is plugged in to the
power outlet.
PUSH THE POWER
BUTTON TO TURN
ON THE DVR
DVR FRONT PANEL - POWER BUTTON
Set the time and Date***:
Click the MENU button from the front panel of the DVR (or the
remote control) to enter SYSTEM SETUP and press ENTER to go to
MAIN MENU. From the MAIN MENU Scroll down to SYSTEM and
press ENTER to go to the DATE/TIME MENU. Press ENTER while on
DATE/TIME MENU to activate menu options.
MAKE SURE THAT *** Note: If the Date/Time is
THE DATE AND TIME set into the past, a message will
ARE SET PRIOR TO appear warning that Overlapped
RECORDING!
date(s) will be erased.
Connect pC Monitor to DVr VGA output:
(not included)
5
To view the video from your DVR on a PC monitor, connect the
VGA Connector Cable from the PC Monitor to the VGA Port located
at the back of the DVR.
nAVIGAtIon ControLS:
Virtual Keyboard Control:
The Virtual Keyboard control becomes available when keyboard input
(A~Z, 0~9) is needed for entering information such as Names,
Network Information, etc.
• Navigate using the arrow keys on the Front Panel or Remote Control.
• Use the ENTER key to choose the letters and numbers.
• Select the APPLY button once the setup is completed.
DVr Menu - navigation Controls:
Navigation Controls:
Move UP/DOWN/
LEFT/RIGHT
Enter Button: Press
this button to select
and change the
values in a menu
option
Active option Indicator: uSB ports:
Orange Highlight - Indicates that the option Provides connection ports for USB Flash Drives
is in active editing mode. (thumbsticks), USB Hard Drives and Optional
Mouse (not included).
Green Highlight - Indicates that the option
is available for editing. Once the option is
highlighted, press the ENTER key to edit
the option (hightlight changes to Orange).
under 15 minutes under 30 minutes
BASIC InStALLAtIon GuIDe
Hand Tools
Time Tools Skills - Easy
Under 10 Minutes*
Hand Tools
* Installation time may vary based
on application and camera cabling
Skill Level
easy Intermediate
Digital Video Recorder*
BroadBand router and
Computers are required (For
loCal and remote monitoring),
not inCluded.
For detailed setup inFormation,
Return Button: Complete
modifications of a menu
please reFer to your user's
option; exit a menu
manual.
*Channel/ port ConFiguration
and hdd (hard disk drive)
CapaCity may vary By model.
CheCk your paCkage For speCiFiC
Content inFormation.
w w w . d i g i m e r g e . c o m
under 60 minutes over 60 min
Skill Level
Hardware Hi Speed
easy I
Router
Plug & Play connectors,
On screen set up
advanced