Schedule Recording - Digimerge DHU500 SERIES Installation Manual

SECTION 4

Schedule Recording

Setup and configurations for Scheduled events.
Schedule Recording
1. CH1-CH4 FRAMERATE: Set the number of Frames Per Second. Press the
to highlight, and press the SEL button to select, and use the
change the settings.
2. QUALITY - Set the quality level for the recording to High, Mid or Low
3. POST ALARM DURATION - Set the length of time to continue recording after the alarm has
stopped.
4. SETUP SCHEDULE: Settings for scheduled recording times. Press the
highlight, and press the SEL button to access the Schedule Setup Submenu:
• Use the
SEL to set the schedule.
• Use the
Time and End Time
• Select SAVE & EXIT to return to the Menu
5. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
Revision 1.0
CH1 Frame Rate:
CH2 Frame Rate:
CH3 Frame Rate:
CH4 Frame Rate:
CH1 Recording Quality
CH1 Recording Quality
CH1 Recording Quality
CH1 Recording Quality
Post Alarm Duration
Setup Schedule
Save & Exit
and to choose a day (SUN-SAT) and
buttons to set the recording Start
FROM
SUN 00:00
MON 00:00
TUE 00:00
WED 00:00
THU 00:00
FRI 00:00
SAT 00:00
Save & Exit
Recording Set
15 FPS
15 FPS
15 FPS
15 FPS
HIGH
HIGH
MED
LOW
Schedule
150 SEC
Setup
Details
and
TO FROM
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
and buttons
and SEL buttons to
and buttons to
TO
00:00
00:00
00:00
00:00
00:00
00:00
00:00
and buttons
31