Device; General - Digimerge DH200+R Series Instruction Manual

4. Under PASSWORD, enter your Digimerge
DDNS password.
Obtain your Digimerge DDNS user
NOTE:
name and password from the confirmation
email.
5. Under UPDATE TEST, click START. If
successful, you will see "GOOD." If
unsuccessful, you will see "ERROR." If you
receive an error, please check your
network connections and carefully
re-enter your Digimerge DDNS
information.
6. Click ENTER to save your settings.
Connecting to your system
After you have port forwarded the required
port, created a DDNS account, and enabled
DDNS on your system, you must enter the
DDNS URL into Internet Explorer to access
your DVR.
The DDNS URL must include http:// , the
name of your DDNS URL, followed by a
colon, then the port number of your DVR.
For example:
http://tomsmith.digimerge.net:80
DDNS URL
NOTE: If you change your default port
number (port 80) to a different port, you
still need to enter your port number after
the DDNS address.
Entering DDNS information using the
remote
• Press the + / - buttons to enter
alpha-numeric characters.

OR
• Press the number buttons on the
remote to enter letters and numbers.
• Press the arrow keys to move to the
next character.

GENERAL

The GENERAL tab allows you to configure Post
Recording time, Audio recording, Key Tone
(key "beeps"), and Key Sensitivity.
1. Configure the following in the General tab:
Port Number
2. Click ENTER

DEVICE

Configure Alarm Out, Alarm Buzzer,
and alarm input settings.
• DISPLAY: Select the output resolution.
• HDMI AUTO: Automatically detects HDMI
monitor and resolution when checked.
• AUDIO RECORD: Select the channel you
would like to assign to audio recording or
select OFF to disable audio recording.
• KEYPAD MODEL: Select the PTZ keyboard
model and baud rate.
• EXTEND DEVICE: Select the desired
device.
• PTZ EVENT: Select the duration of a PTZ
event.
• ALARM OUT: Select the duration of an
alarm out event.
) to save your settings.
(
Using the Main Menu
47