Running Cms-Dh On Multiple Monitors - Digimerge DH200+R Series Instruction Manual

Running CMS-DH on multiple monitors

CMS-DH can support a maximum of 8 monitors on a single system. Running 8 monitors is
extremely resource intensive. The recommended system specifications are listed below. If your
system does not meet the requirements below, you may experience slow system performance.
Minimum system recommendations to run CMS-DH on multiple monitors
• Intel Core i5 or i7 processor.
• 6 GB of RAM.
• A motherboard that can support up to four (4) PCI-E video cards.
• Geforce 9500 GT video card, 1GB or greater.
To run CMS-DH on multiple monitors:
1. Connect to CMS-DH. Open the desired DVR's / E-Maps, etc. that you wish to view.
2. Drag the desired tabs to a different monitor.
3. Repeat as required.
Final Result
Drag the tab out to move it into a different screen.
CMS-DH Central Management Software
97