Triggering Cameras To Record During Video Loss - Digimerge DH200+R Series Instruction Manual

Triggering cameras to record during Video Loss

If video loss occurs, the system can trigger secondary cameras to begin recording as an event.
For example, if a vandal attempts to cut the camera wiring, as soon as the cable wire is cut, the
system triggers other cameras to detect as a motion event.
1. Under the DAY EVENT or NIGHT EVENT tab, click (
configure.
2. Under VLOSS, ensure that whatever channel you are configuring is selected. In this example,
Camera 1 is selected.
Example
Select camera 1 and 2
3. Click ENTER
(
Final Result
When video loss occurs on cameras 2 or 3, camera 1 begins recording as an event.
Select cameras 2 and 3.
) to save your settings.
Setting up Motion Recording
) beside the channel that you wish to
Event Edit icon
33