Formatting The Hard Drive - Digimerge DH200+R Series Instruction Manual

Appendix H: Replacing the Hard Drive

Formatting the Hard Drive

: Formatting the HDD erases
ATTENTION
be undone
. System settings will not be erased.
To format the hard disk:
1. Press the MENU button on the front panel of the system.
2. Click DISK>RECORDING DISK.
3. Beside the hard drive you wish to format, click the REMOVE button.
4. When the system prompts if you want to remove the disk, click YES.
5. Click the DISK MANAGER tab.
6. Select the hard drive you wish to format under DEVICE.
7. Beside ACTION, select ASSIGN TO RECORD DISK.
8. Click the START button. The system begins to format the hard drive.
150
all data
on the hard disk.
RECORDING DISK
REMOVE button
This step cannot