Setting Up Motion Recording - Digimerge DH200+R Series Instruction Manual

SETTING UP MOTION RECORDING

Motion recording allows the system to mark events as motion recording. This allows you to search
for footage that only has movement.
Step 1: Configure Camera motion sensitivity & configure Event frame rates
1. Press the MENU button on the remote or front panel to open the main menu.
• If using a mouse, right-click to open the virtual remote, then click MENU.
2. Click CAMERA.
3. Click the camera number button to select the camera you wish to configure.
4. Beside MOTION GRID, click (
by default) or click (
portions of the screen you wish to enable motion.
5. Beside MOTION LEVEL, press -/+ to adjust the motion sensitivity.
6. Click ENTER
(
7. Click RECORD>DAY.
Record
NOTE: If you would like to create a schedule with different settings at different times, you can
click on RECORD>GENERAL, and under SCHEDULED USE, select ON. Then, click the NIGHT
tab and follow the same instructions below.
) to enable motion detection on the entire screen (selected
) to enable certain portions of the screen by double-clicking the
) to save your settings.
Click camera button
Motion detection area. Blue areas
indicate that the screen is enabled
for motion recording.
DAY
29