Playback - Digimerge DH200+R Series Instruction Manual

PLAYBACK

View recorded video on the system through playback mode.
Playback speed indicator
To begin playback:
1. Select the number of channels you wish to playback (i.e. single channel, or quad view, etc.)
2. Press the Play button (  ) on the remote control or press  on the Virtual Remote. The
system will play the last few minutes of the most recently recorded video.
3. Press the following buttons on the remote control to use playback functions:

• : Press to switch between forward and reverse playback.
• : Press to pause playback; press repeatedly for frame-by-frame reverse playback.
• : Press to pause playback; press repeatedly for frame-by-frame forward playback.

• : Press to increase reverse playback speed.

• : Press to increase forward playback speed.
To return to Live viewing:

• Press to stop playback and return to live viewing.
19
CAM1
Playback display view