Appendix F: Connecting Additional External Monitors - Digimerge DH200+R Series Instruction Manual

Appendix F: Connecting Additional External Monitors

APPENDIX F: CONNECTING ADDITIONAL
EXTERNAL MONITORS
Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor
Out displays the exact on-screen display of the system.
Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the
system.
NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs.
To use spot out functions:
1. With a spot monitor connected, press the
Remote followed by the numeric button for the channel you wish to view (full-screen).
2. Press the
SPOT OUT
is set to Auto Sequence).
When an alarm is triggered, Spot Out will display the triggered channel in full-screen.
146
Monitor
(not included)
button twice to begin Auto Sequence (by default, Spot Out on the system
Spot Monitor
(not included)
button on the remote control or Virtual
SPOT OUT