Digimerge DH200+R Series Instruction Manual page 156

Appendix E: Connecting PTZ Cameras
Button
MENU button
Navigation buttons
Increase/Decrease
buttons
Preset
Go
Auto Tour
Speed
144
Result/Action
• Press to open/close the PTZ virtual remote

• Press to tilt up/down

• Press to pan left/right
+ / -
• Press to zoom in and out
• Set PRESET position (Spot Out on the remote control)
1. Move PTZ to a desired location
2. Press the Preset button
3. Set the # for the Preset location
4. Click Preset to save and exit
• Go to the preset position; INFO on the remote control
1. Press the GO button
2. Enter the desired Preset # and click Go
• Start AUTO TOUR
• Press the Auto Tour button
• Press + and enter the range of preset and Click ENTER
• For example, Auto Tour button, +5 will start the tour of 1~5
presets of the PTZ camera
• Speed has 7 increments—press the buttons to increase/
decrease speed