Digimerge DH200+R Series Instruction Manual page 148

Appendix C: Digimerge Auto Port Forward Wizard
Step 2: Enter your router settings
1. Under the Router drop-down list, select the model of your router.
OR
• Click the Search button (
NOTE: Click the Auto Detect button (
most Linksys or Netgear models).
Router drop-down list
Enable Silent Mode
Router IP
Router user name &
password
2. Under Router IP, click the Detect Router IP button (
• The router's IP populates in the blank field. Click OK to exit the prompt.
3. Under Username and Password, enter
• Optional: Under HTTP Type (default http://) and HTTP Port (default, 80), you may have to
change the values depending on your router model. Consult your router manual for details.
4. Under IP, enter the IP address of your Digimerge device.
NOTE: The IP is usually found in the information window of your DVR.
5. Under Port, enter the DVR's Web Port (by default, port 80).
6. Click Next to continue.
136
) to enter the name of your router model.
)if you have a Linksys or Netgear router (works with
the router's
Enter your Digimerge
device's IP
Search and Auto detect
button
).
username and password.
80
Enter port under
Ports
Enter port
number