Using The Main Menu - Digimerge DH200+R Series Instruction Manual

Using the Main Menu

USING THE MAIN MENU
To open the Main Menu:
• Press the MENU button on the front panel or the remote control. OR
• Right-click to open the virtual remote control and click MENU.
1
2
3
4
System Main Menu
1. DISPLAY: Adjust OSD borders, split-screen configuration, and Auto Sequence settings.
2. CAMERA: Adjust brightness, camera titles, color, contrast, title, and PTZ settings.
3. RECORD: Enable/disable recording for each camera, configure the recording quality, frame
rate, and motion.
4. SCHEDULE: Customize DAY and NIGHT recording modes according to a daily or weekly
schedule.
5. DISK: Configure hard drive options, monitor hard drive status, and format hard drives or
backup drives.
6. NETWORK: Configure IP, email, and DDNS settings.
7. DEVICE: Configure post recording time, key sensitivity, audio recording, and alarm settings.
8. SYSTEM: Configure video output settings, audio recording, alarm settings, and PTZ event
settings.
34
5
6
7
8