Night - Digimerge DH200+R Series Instruction Manual

• (EVENT EDIT): Click this icon to open
the EVENT EDIT menu.
About the EVENT EDIT window
The EVENT EDIT window allows you to have
other cameras trigger the camera you are
configuring to record events. For example, you
can tell the system to have camera 1 record,
when there is video loss in camera 3. Likewise,
you can tell camera 1 to record as an event
when there is motion detected in camera 5.
To configure the EVENT EDIT window:
1. Configure the following:
• ALARM IN: Select the Alarm In devices
that, when triggered, will cause the camera
you are configuring to record as an event.
• MOTION: Set the camera (i.e. Camera A)
that you want to trigger the system to
record when the camera (Camera A)
detects motion. For example, if you are
configuring channel 1, and enter channel 8
in the motion column, this tells the system
that when a motion event occurs in channel
8, it will cause channel 1 to record, and
mark the recorded video as an event.
• VLOSS: Select the channels to monitor for
Video Loss. For example, if you select
channel 3, the camera you are currently
configuring will start event recording on
the camera you are currently configuring.
NOTE: By default, a video loss event will be
logged on the same channel that it occurs.

NIGHT

Configuring the NIGHT tab
The NIGHT tab allows you to configure how the
system will record during Night recording in
the Scheduled recording menu.
To configure the NIGHT tab:
1. In the RECORD menu, click the GENERAL
tab.
2. Beside SCHEDULE USE, select ON.
GENERAL tab Select ON
3. Click the NIGHT tab.
4. Beside the desired channel you wish to
configure, adjust the following for
Continuous and Event recording:
• Under F/S, select the frames per second
of the particular channel during NIGHT
mode recording.
• Under QUALITY, select the recording
quality during NIGHT mode recording.
5. Click ENTER
(
Using the Main Menu
) to save your settings.
39