Digimerge DH200+R Series Instruction Manual page 42

Setting up Motion Recording
8. Below EVENT, enter the frame rate for motion recording on this camera under F/S. Repeat
for any other cameras that you wish to enable motion recording.
NOTE: If you want to disable continuous recording, under CONTINUOUS, under F/S, select OFF.
This causes the system to record only when the cameras detect motion.
9. Under QUALITY, enter the desired video quality when the camera detects motion.
10. Click ENTER
(
Step 2: Configure Schedule settings (optional)
NOTE: By default, Day recording settings are used 24/7. If you would like to create a custom
schedule, click on RECORD>GENERAL, and under SCHEDULED USE, select ON.
1. Click SCHEDULE.
SCHEDULE
2. Double-click the days that you wish to configure the Day and Night recording schedule.
Double-click on the day to configure.
3. Configure the following:
30
) to save your settings.