Digimerge DH200 Quick Setup Manual

Right for Business
dH200
Series
digimerge Touch dVR
QuICK SETuP GuIdE
PACKAGE CONTENTS:
1 x DIGITAL VIDEO RECORDER WITH PRE-INSTALLED HDD*
1 x POWER ADAPTOR
1 x REMOTE CONTROL
1 x MOUSE
1 x USER MANUAL
1 x QUICK START GUIDE
1 x SOFTWARE CD
ATTENTION:
• * Channel/ Port configuration and HDD (hard disk drive) capacity may
vary by model. Check your package for specific content information.
• Monitor and Cameras are not included.
• Ethernet Cable, Broadband Router and Computer are required for
local and remote monitoring (not included).
• For detailed setup and software information, please refer to your
printed User's manual (included).
It's all on the Web w w w. d i g i m e rg e . co m
Toll free tech support
available after completing
product registration. For
more information on this
product, firmware updates,
warranty and accessory
products, please visit us at:
www.digimerge.com
Information in this document is subject to change without notice. As our products are
subject to continuous improvement, Digimerge Technology Inc. reserve the right to
modify product design, specifications and prices, without notice and without incurring
any obligation. E&OE © 2009 Digimerge. All rights reserved.
Time
BASIC SETuP
under 15 minutes under 30 minutes under 60 minutes
Time
Hand Tools Hardware
BASIC INSTALLATION G uIdE
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time: 20 Minutes Hand Tools Skills - Easy
STEP 1
Skill Level
Hand Tools Hardware Hi Speed
Router
easy Intermediate
Skill Level
Quick Setup
Connecting Cameras
(not included)
Connect up to eight BNC cameras Intermediate advanced
1 easy
to the BNC ports on the rear panel.
NOTE: Test the cameras prior to
selecting a permanent mounting
location by temporarily connecting
the Cameras and Cables to your
DVR.
Connecting the uSB Mouse
Managing Passwords
Connect a mouse (USB/PS2
2
compatible) to the USB port on
the rear panel.
MOuSE TIPS
When using the mouse, the ENTER and
EXIT buttons appear in the top-right corner
of every menu window. When you change
system settings and configurations, click Setting the date & Time
to confirm your changes.
Connecting a Monitor
(not included)
Connect the VGA cable (not
3a
included) from your LCD monitor
to the VGA port on the rear panel
of the Touch DVR.
OUT
OR
From one of the Video-Out ports
3b IN
connect a BNC terminated cable
to a TV or CCTV monitor.
OUT
Connecting the Ethernet Cable
Connect one end of the Ethernet
4
cable (not included) (for remote
using the Remote Control
monitoring) to one of the router's
(not included) LAN ports and the
other end to the DVR's Network
Port.
Powering ON the Touch dVR
Connect the power cable to the
5
DC port on the rear panel of the
DVR. Touch the POWER button
on the front panel OR press the
POWER button on the remote
NOTE: You will need to input your
control. At startup, the system
system password (by default,
performs a basic system check
000000) to power off the system.
and runs an initial loading
NOTE: Pressing the "Power"
sequence. After a few moments,
button after plugging in the power
the system loads a live display
cable is only necessary for initial
view. startup (first time out of the box).
Time
BASIC SETuP
over 60 minutes under 15 minutes under 30 minutes under 60 minutes
Time
Hi Speed Hand Tools Hardware
BASI C I NSTA L LATIO N G u I dE
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time: 20 Minutes Hand Tools Skills - Easy
STEP 1
Skill Level
Hand Tools Hardware Hi Speed
CONTINuEd
Router
advanced easy Intermediate
Skill Level
disabling Quick Setup
using the Main Menu
By default, the system You must disable Quick Setup in order to access
6
has Quick Setup enabled. Intermediate advanced
the full system main menu. easy
Quick Setup lets you
To disable Quick Setup:
quickly adjust the time
1. In Quick Setup Menu under the AdVANCEd tab,
and record mode on
select RuN AdVANCEd.
the system. The system
2. Select ON and press the ENTER button. The window
menu will appear as the
closes. Quick Setup has been disabled. The full main
Quick Setup menu with
menu will appear when you press the MENu/ESC
only Time and Record
button.
options available.
By default, you do not have to enter a
7
password upon initial startup.
using a Mouse
However, you can enable this option
in MAIN MENu>SYSTEM>GENERAL.
For more details, please refer to the
user's manual.
NOTE: This step refers to accessing the MAIN
MENU without enabling the Quick Setup.
Stop recording (including Manual and
8
Schedule recording) on the system by
pressing/on the front panel, or
pressing the  button on the remote
control and enter your 6-digit system
password (by default, 000000).
Touch Panel Tips and Tricks
1. Press the MENu/ESC button to open the
system menu. Select SYSTEM and press
NOTE: It is highly recommended to set
the ENTER button. The System menu
the time on the system prior to doing any
opens.
recording. All recording must be stopped
2. Select the TIME tab.
on the system in order to set the time.
3. Select dATE and enter the date
(mm/dd/yyyy). NOTE: If using the mouse right click and
4. Select TIME and enter the time then click  on the Virtual Remote.
(hh/mm/ss).
5. Press the ENTER button located at the
top right corner of the screen to save
your changes.
6. Press /on the front panel, or press
Stopping Scheduled Recording: If you need
the  button on the remote control to
resume Continuous Recording. to stop a recording schedule, press on
NOTE: This step refers to accessing the the front panel or on the Remote conrol
using the Virtual Remote
and enter your 6-digit system password (by
MAIN MENU without enabling the Quick
default, 000000).
Setup.
1
9 1. LEd Indicator: Flashes red with 2 9
every button-press
10
2. POWER: Press to power the system
3
ON/OFF (password required).
11
3. Navigation/Menu 4
4. : Press to switch between single 5 12
channel full-screen, quad, and
using the Virtual Keyboard
split-screen displays. 6
5. : Press to confirm menu options/
selections.
7
6. Playback controls
7. Channel buttons: Press to view
8
channels 1~8.
8. Press to open the Time Search
menu.
NOTE: You can use the channel
9. CANCEL/ESC: Press to close menu
buttons on the remote control
windows.
to enter numbers, letters, and
10. + increase values.
other characters.
11. - decrease menu options.
12. Press to start manual recording.

Time
NAVIGATION ANd CONTROLS
over 60 minutes under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Hi Speed Hand Tools Hardware Hi Speed
BAS IC IN S TALL ATI ON G uI dE
Router
Time: 20 Minutes Skills - Easy
STEP 2
Skill Level
advanced easy Intermediate advanced
This step relates to remote viewing over the LAN (local area network)
by using a PC located on the same network as that of the DVR.
Press the MENu/ESC button on the
1
Retrieve the dVR Information
front panel or the remote control.
1. dISPLAY
1 5
2. CAMERA
3. MOTION
2 6
4. RECORd
5. ALARM 3 7
6. SCHEduLE
4 8
7. NETWORK
8. SYSTEM
1. Left-Button: While in a split-screen display mode,
2
double-click an individual channel to view it in full-
3
screen; double-click again to return to the split-
1
2
screen display mode. While navigating menus, click
to select a menu option; double-click to open the next
menu.
2. Right-Button: Right-click anywhere on the screen
to open the Virtual Remote; double-click anywhere on
the screen to return to the previous menu.
3. Scroll-Wheel: Move the scroll wheel up or down
to increase/decrease the value of a selected menu
option.
If using the Touch panel, you will often use the following
3
buttons when controlling the system:
• CLR : Menus: move cursor up; Playback: pause playback; Live
Install Software (on your local computer):
viewing: show/hide OSD; clear channel icons
• / : Menus: move cursor down; Playback: stop playback;
Live viewing: open Log menu
2
•  / : Menus: move cursor left; Playback: increase reverse
playback speed; Live viewing: start/stop recording
• /  : Menus: move cursor right; Playback: increase forward
playback speed; Live viewing: start/stop scheduled recording
• Press the MENu/ESC button to open the main menu and
close windows.
• Press the button to increase values for selected menu options.
• Press the button to decrease values for selected menu options.
• Press the button to enter/confirm.
1
dVR NetView Software (on your local computer):
Right-click anywhere on the screen to open the
4
2
Virtual Remote. The Virtual Remote gives you
3
quick acces to many of the system's features
using only a USB mouse (included).
1. Quick Function Keys 3
2. Navigation/Menu
3. Playback controls
4
4. Channel Buttons
When configuring certain options, such as
5
Camera Title, the Virtual Keyboard opens
4
to make mouse input easier.
Congratulations! You have completed STEP
1 & 2 successfully. Your DVR is now ready to
use. Refer to the owner's manual to learn
how to record, playback, use the search
features and all other features available
with this DVR.
Time
SET-uP LOCAL VIEWING ON YOuR PC
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time
Hand Tools Hardware Hi Speed
LOCAL VIEWI N G I N STA LLATIO N G u I dE
Time: 30 Minutes Hardware Skills - Intermediate
STEP 3 Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
PC/Router
Skill Level
Hand Tools Hardware
Hi Speed
easy Intermediate advanced
Router
Skill Level
easy Intermediate advanced
To find the IP and MAC addresses, press the (REWINd) button
1

on the remote control or
1. Open the MAIN MENu and select SYSTEM.
2. Under the INFO tab, you will find your system's IP address.
Record the IP and MAC Addresses in the section below:
IP ADDRESS : . . .
MAC ADDRESS : : : : : :
(Required for DDNS registration)
Insert the software CD into your
computer's CD/DVD-R drive. At
the prompt, run or double-click
NetViewInstaller.exe
Follow the installation screens to
complete dVR NetView Software
installation.
Once the installation finishes,
click Close. A shortcut icon
appears on your desktop.
DH200 Touch Series Quick Setup Guide - English - R1