Configuring Digi Imobile Touch Lite/Pro - Digimerge DH200+R Series Instruction Manual

iPhone: Digi iMobile Touch App

Configuring Digi iMobile Touch Lite/Pro

Once you have installed the application, enter your DVR's information to connect remotely.
To enter your DVR information into Digi iMobile Touch Lite:
1. Tap the + button.
2. Enter the following:
• Name: Enter the DVR name of your choice.
• IP/Host:
• Enter the local IP of the DVR, followed by a colon, followed by the DVR's port number
OR
• Enter the DDNS address of the DVR, followed by a colon, followed by the DVR's port
number (i.e.
• Username: Enter the DVR's user name (by default, admin)
• Password: Enter the DVR's password (by default, 000000)
Tap Done to continue.
112
+
button
touch.digimerge.net:80
Enter DVR name
Enter DVR DDNS address or local IP address
Enter DVR user ID (by default: admin)
Enter DVR password (by default: 000000)
Tap Done
Digi iMobile Touch Lite users:
You can add a maximum of two
(2) DVRs to the Device list.
Digi iMobile Touch Pro users:
You can add a maximum of ten
(10) DVRs to the Device list.
)
You must include the
port number when
entering the DVR's
DDNS or LAN address.