Digimerge DH200+R Series Instruction Manual page 43

• MODE: Click the +/- buttons to change to apply DAY recording, or NO REC to disable recording.
If you configured DAY recording in Step 1, select DAY.
NOTE: You cannot configure NIGHT recording to have a beginning and end time. However, if
NIGHT recording is chosen, the NIGHT recording parameters apply to sections of the schedule
that are not included in DAY or NO REC.
• BEGIN: Enter the time you want the scheduled recording to start.
• END: Enter the time you want the scheduled recording to end.
4. Click ENTER
(
Final Result
When the camera detects motion, the (

( ). The channel number turns red to indicate alarm recording. During video search, motion
events will appear as EVENT. If the channel number does not turn red, then motion recording has
not been enabled. Double-check to see that you have enabled motion recording in Step 1.
The green motion
icon and red channel
icon indicates that
the channel is set up
for motion recording.
) to save your settings.
) symbol appears, and the channel number turns red 
Setting up Motion Recording
31