Configuring Digi Imobile Touch Lite - Digimerge DH200+R Series Instruction Manual

Android: Digi iMobile Touch Lite App

Configuring Digi iMobile Touch Lite

Once you have installed the application, enter your DVR's information to connect remotely.
To enter your DVR information into Digi iMobile Touch Lite:
1. Press the Menu button on your phone, and then tap Add Device.
2. Enter the following:
• Name: Enter the DVR name of your choice.
• IP/Host:
• Enter the local IP of the DVR, followed by a colon, followed by the DVR's port number.
OR
• Enter the DDNS address of the DVR, followed by a colon, followed by the DVR's port
number (e.g.
• Username: Enter the DVR's user name (by default, admin).
• Password: Enter the DVR's password (by default, 000000).
3. Tap Done to continue.
touch.digimerge.net:7000
*Phone interface may vary depending on model.
120
Tap Add Device
touch.digimerge.net:80
Enter DVR name
Enter DVR DDNS address or local IP address
Enter DVR user ID (by default: admin)
Enter DVR password (by default: 000000)
You can add a maximum
of two (2) DVRs to the
Device list.
).
You must include the
port number when
entering the DVR's
DDNS or LAN address.