Energy Saver Mode; Auto Reset - Ricoh Priport DX 3240 Operating Instructions Manual

Table of Contents

Basics

Energy Saver Mode

If the machine has not been operated

for a certain period of time after print-

ing, or when you press and hold the

{Clear Modes/Energy Saver} key for 3

seconds, the panel display goes off

and the machine enters Energy Saver

mode. In Energy Saver mode, the ma-

chine consumes less electricity. Press

the {Clear Modes/Energy Saver} key

again, and the machine will return to

the ready condition.

Note

❒ By default, the time taken for the

machine to shift to Energy Saver

mode is 3 minutes.

❒ You can change the waiting time

within a range of 1 to 120 minutes.

See "Energy Saver Timer"on p.104

"2 System".

❒ In the following cases, the machine

will not shift automatically to En-

ergy Saver mode.

• If there is no ink

• If originals are or paper is jammed

• If the machine has not finished

making masters or prints

• If the machine is printing the

second page of a Combine print

• If there is no master

• If the master eject box is full

• If there is an original in the op-

tional Auto Document Feeder

• If the "cover open" indicator is

lit

• If you are in the process of mak-

ing changes to the user tools

• If the screen for entering a user

code is displayed

Auto Reset

This machine can be set to return au-

tomatically to its initial condition if it

has not been operated for a certain pe-

riod of time. This is called "Auto Re-

set".

Note

❒ The Auto Reset time can be set

from 1 to 5 minutes, or to "Off".

See "Auto Reset Timer" on p.104

"2 System".

❒ The default for Auto Reset is Off.

❒ In the following cases, Auto Reset

will not take place.