Enabling Paging (Intercom); Single Page; Group Paging (Limited To Specific Models; See Below) - Cisco 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Log in to the web administration interface.
Click Admin Login and advanced.
Click the User tab.
Under Supplementary Services, in the Log Missed Calls for EXT <number> field,
choose yes.
Click Submit All Changes.

Enabling Paging (Intercom)

The paging, or intercom feature, allows two types of paging:

Single Page

A user can directly contact another user by phone. If the person being paged has
configured their phone to automatically accept pages (see
to Automatically Accept Pages, page
connection between the two phones is automatically established when paging is
initiated.

Group Paging (Limited to specific models; see below)

Group Paging lets the user page all the client stations at once (SPA500 Series), or
page groups of phones (SPA525G). If the client station is on an active call while a
group page starts, the incoming page is ignored.
When paging occurs, the speaker on the paged stations is automatically powered
on unless the handset or headset is being used.
Group page is one-way only. The paged client stations can only listen to the call
from the originator.
To enable paging:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Supplementary Services, under Paging Serv, choose yes.
Configuring a Phone
47), the phone does not ring and a direct
3
46