Broadsoft Syntax; Asterisk Syntax; Configuring Broadsoft Busy Lamp Field Auto-Configuration (Spa525G) - Cisco 501G Administration Manual

Configuring the Cisco SPA500S Attendant Console
Setting Up the Cisco SPA500S Attendant Console
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA500 Series and WIP310 IP Phone Administration Guide

BroadSoft syntax

For example, the following enables speed dialing and BLF monitoring, with a BLF
monitoring list URI of marketing, for the user account reception, on a BroadSoft
server with the IP address 192. 1 68. 1 00. 1 :
fnc=sd+blf;sub=marketing@192.168.100.1;usr=reception@192.168.100.1
nme
The keyword is not used because the BroadSoft server uses the user
account name assigned to the BLF monitoring list.
Note that you can configure a list of BLF subscriptions automatically using a URI
(rather than individually configuring each BLF entry). See the
BroadSoft Busy Lamp Field Auto-Configuration (SPA525G)" section on
page 171.

Asterisk syntax

The following is an example entry for a Asterisk server. This entry enables speed
dialing, BLF monitoring, and call pickup on a Asterisk server with the IP address
192. 1 68. 1 . 1 1:
fnc=sd+blf+cp;sub=35890@192.168.1.11;nme=35890
Configuring BroadSoft Busy Lamp Field Auto-Configuration
(SPA525G)
Rather than configuring each BLF key individually, you can enter a single
SUBSCRIBE URI and automatically generate configuration scripts for BLF keys for
all users on the monitored list.
To configure BLF auto-configuration:
Log in to the web administration interface.
Click Admin Login.
Click advanced.
Click the Att Console tab.
9
"Configuring
171