Configuring Lightweight Directory Access Protocol (Ldap) For The Spa500 Series - Cisco 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Lightweight Directory Access Protocol (LDAP) for the SPA500 Series

STEP 7
STEP 8
STEP 9
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Configuring Lightweight Directory Access Protocol (LDAP) for
the SPA500 Series
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
be configured using the IVR. See the
section on page 17.)
In the Admin Passwd field, enter a password if you want the system administrator
to log on to the web UI with a password. The password prompt will appear when
an administrator clicks Admin Login. The maximum password length is 32
characters.
In the User Password field, enter a password if you want users to log on to the web
UI with a password. The password prompt will appear users click User Login. The
maximum password length is 32 characters
Click Submit All Changes.
You can also enable the web administration interface from the Phone tab (does not
apply to the WIP310):
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Web Serv, choose yes.
Click Submit All Changes.
The SPA500 Series IP Phones support Lightweight Directory Access Protocol v3
to enable the retrieval of directory information. The LDAP Corporate Directory
Search feature, when configured and enabled on a SPA500 Series IP Phone,
allows a user to search a specified LDAP directory for a name, phone number, or
both. (LDAP is not supported on the WIP310.)
LDAP-based directories, such as Microsoft Active Directory 2003 and OpenLDAP-
based databases, are supported.
"Using IVR on the SPA501G IP Phone"
3
59